Wifi.wavlink.com login to Wavlink extender setup. http://wifi.wavlink or are web interface to configure and manage the Wavlink extender. Track the performance status of your Wavlink extender with this inbuilt server.

To access the Wavlink login page, connect your Wavlink extender to the WiFi router. In order to perform the Wavlink extender setup, you need to enter http://wifi.wavlink.com or in the address bar and then enter the default username and password.

Wavlink login

Wifi.wavlink.com login allows the users to access the Wavlink login page to set up and manage the Wavlink extender. To access the WiFi Wavlink login page, you need to connect your extender to the router and WiFi-enabled device through an ethernet cable. 

wifi.wavlink or login- a step-by-step process
  • After connecting the device to the extender network, open any preferred browser on your device.

  • Now, enter http://wifi.wavlink.com in the address bar of the web browser and press the enter key.

  •  Then, on the Wavlink login page, enter your login details and tap on the login button to complete the Wavlink login process.

Note: The default username and password for Wavlink login is admin. If you have changed the login password, then enter the new password.

wifi.wavlink.com login Wav link extender setup

Wavlink Extender Setup

You can either perform the http://wifi.wavlink.com setup, or you can use the WPS button for the Wavlink extender setup. Following are the steps to set up the Wavlink extender.

Wavlink Extender Setup or installation using WPS method
Wavlink Extender Installation with WPS button

In this method, you need not to enter the user ID and password to set up the Wavlink extender. Go through the below-mentioned steps to set up the Wavlink WiFi range extender with the WPS button:

  • First and foremost, plug your Wavlink extender near to the WiFi home router and turn it on.

  • After that, locate and press the WPS button on the Wavlink extender for 2 seconds. Then, release the WPS button.

  • Now, press the WPS button on the WiFi router within two minutes after pressing the button on the extender.

  • A green LED light on the extender indicates that the Wavlink extender is successfully connected to the wireless network.

  • Finally, you can plug your Wavlink extender in the new location and connect your WiFi-enabled devices to the Wavlink extender network.

Configure Wavlink Extender using wifi.wavlink.com

Following are the steps to perform the http://wifi.wavlink.com setup:

  • To begin, attach the antennas to the Wavlink extender and plug the extender into the wall socket.

  • Now, turn on your computer or mobile and move to the WiFi settings.

  • Then, connect your device to the extender’s network and launch any preferred browser.

  • Type http://wifi.wavlink.com in the URL bar of the web browser.

Note: If you are unable to access the wifi.wavlink.com web interface, then you can use the IP address.

Configure Wavlink Extender using wifi.wavlink.com login Setup
  • After entering the web address, press the enter key and type the login details on the resulting page.

  • In the next step, choose your time zone, country, region, create a password and tap on the Next button.

  • Then, assign a new SSID and password for the 5 GHz band, or you can use the same SSID and password for both bands.

  • Now, select a security passcode for the router network and tap on the Next button.

  • After that, review the settings and tap on the finish button to complete the Wavlink extender setup process.

  • You need to wait for a few seconds to complete the extender reboot process to apply the settings.

  • After completing the process, connect your device to the extender’s network with new settings.

  • You can relocate the Wavlink extender to a new location to enjoy a flawless internet connection.

Can’t access wifi.wavlink.com login page

Sometimes users may encounter the issues with wifi.wavlink.com login. You need to resolve the issues immediately to avoid interruptions with the internet connection. Following are the troubleshooting steps to fix the issues with the wifi.wavlink.com login.

Check the hardware connection

Make sure that your Wavlink extender is connected to the power source and router in a proper manner. If you are connecting your extender to the router wirelessly, then switch to the wired connection. Connect your extender to the computer system through an ethernet cable.

Check your PC’s IP address

Make sure that your PC has obtained the right IP address. You can use the control panel to check the IP address of your computer. If you still can’t log in to the wifi.wavlink.com interface, proceed with the next step.

Use an updated web browser

Make sure that you are using the updated version of the web browser to access wifi.wavlink.com. Delete the cache memory, browsing history, junk files, temporary internet files, downloading history, and cookies before accessing the wifi.wavlink.com login page.

Update the firmware

Use the updated firmware to access the Wavlink login page because the outdated version of firmware can cause interference with the wifi.wavlink.com login. To update the firmware, go to the official website of Wavlink through wifi.wavlink.com and check for the updates. If there is any update available, then tap on the update button and download the update file.

Wavlink Extender Reset

If you are facing any issues with your Wavlink extender, then you need to perform the factory default reset. Resettings the extender to its factory default settings will remove all the details, including your network SSID and password. After resetting the extender, you can configure your extender as a new extender. login setup wifi.wavlink extender or reset wavlink Wifi repeater
How to reset the Wavlink extender to factory default settings?
  • Connect your Wavlink extender to the wall socket and turn it on.

  • Now, locate the reset button on the extender.

  • Then, take a sharp pin or paperclip and press the reset button for 8 seconds.

  • When the LED light starts blinking, release the button.

  • The Wavlink extender will reset to the factory default settings. Now, you can access the wifi.wavlink.com login page with the default username and password.

Common Issue related to Wavlink Extender login or Setup
  • wifi.wavlink.com not working

  • http://wifi.wavlink.com refused to connect

  • can’t access wifi.wavlink.com login panel

  • Wavlink Extender setup

  • Wont install wavlink Wifi Repeater

  • Configure Wavlink range extender

  • Can’t reach wavlink login page

  • wavlink router flashing red

  • wavlink ac1200 not working

  • wavlink extender not connecting to internet

  • wavlink ac1200 dual band wireless router setup

  • www.wifi.wavlink.com not working on laptop

  • http://wifi.wavlink.com not working on windows 10

  • wavlink ac1200 repeater setup

  • Wavlink AC600 Setup

  • wavlink Extender not connecting to internet

  • wavlink n300 WiFi range extender setup

  • Wavlink extender firmware update failed

  • How to reset Wavlink repeater factory setting?

  • red light on Wavlink WiFi booster

  • Wavlink mesh wifi setup

  • Wavlink setup failed

  • http://ap.setup Wavlink not working

  • Wavlink mesh setup

  • Setup

Privacy Settings
We use cookies to enhance your experience while using our website. If you are using our Services via a browser you can restrict, block or remove cookies through your web browser settings. We also use content and scripts from third parties that may use tracking technologies. You can selectively provide your consent below to allow such third party embeds. For complete information about the cookies we use, data we collect and how we process them, please check our Privacy Policy
Consent to display content from Youtube
Consent to display content from Vimeo
Google Maps
Consent to display content from Google